Skip to content Link Search Menu Expand Document
ModalAI DOCS
Store

MVX WiFi Mode

Switch the VTX radio to standard WiFi, in station or SoftAP mode, for network access to the drone.

The VTX radio and standard WiFi are the same hardware. You can switch the radio from video to standard WiFi, for example to put the drone on your network on the bench, and back again. This applies to the stand-alone VTX Air Unit (MVX-T0001) and to drones with a built-in VTX, such as Stinger.

Switch to WiFi

Disable the VTX, which returns the radio to standard WiFi, then configure WiFi with voxl-wifi:

voxl-configure-vtx --disable
voxl-wifi

The voxl-wifi wizard sets up station mode (join an existing WiFi network) or SoftAP mode (the drone creates its own hotspot, on 2.4 or 5 GHz). It works the same as on any VOXL 2; see VOXL 2 WiFi Setup.

When you are done using WiFi, re-enable the VTX:

voxl-configure-vtx --enable

voxl-configure-vtx -t toggles between the two modes in one step.

WiFi and video at the same time

The radio carries either MVX video or WiFi, not both. If you need a WiFi connection while the VTX is sending video, add a USB WiFi dongle; the supported dongles are listed in VOXL 2 WiFi Setup.