VOXL 2 Ethernet Expansion and USB Hub

Overview

The M0062 VOXL 2 Ethernet Expansion and USB Hub provides convenient access to extra I/O.

Buy Here Support

Note: the USB A connector, J10, is not working consistently on this board for USB3 speeds and may only work in USB2 mode. Please use J11 if you need USB3. You can use MCBL-00022-2 to convert this into an “A-type” port.

Details

The M0062 provides a variety of basic access to several key features supported by the VOXL 2 platform, including:

• USB3 host port in the 10-pin ModalAI format with 1A VBUS support
• USB2 host port in the 4-pin ModalAI format with 1A VBUS support
• USB2 host port in a Type-A format (this port uses a USB3 Type-A connector, but USB3 speeds may not be work, use J11)
• uSD and UFS Combo Card Socket direct on-board (accepts either uSD or UFS memory cards)
• Dedicated Linux Kernel Debug UART Port using on-board FTDI to Micro-USB
• 10/100/1000 GbE RJ-45 Ethernet Jack (with integrated magnetics)
• 6-pin JST GH for SPI port access
• 6-pin JST GH for 2W UART + I2C access